The binder technology of fiberglass chopped strand mat

In this paper we just use the powder binders as example

Glass fiber distributes uniformly on the belt and combined with binder. Settlement segment need to keep clean and dry. The combination of the powder is composed of two powder adhesive applicator conduct, as well as a series of water without minerals (distilled water) spray composition.

The chopped strand mat, the upper and the lower part of both sides, gently spray with distilled water, the operation is better adhesion necessary steps binder. We can use special powder applicator to ensure the best distribution powder. The transducer between the two applied the powder can be passed to the lower side of the mat.

Combined with the emulsion

Screen system used to ensure adequate diffusion of the binder. The excess binder will be recovered by a special suction system.

This system allows air through the mat and binder were taken away. The binder is evenly distributed and the excess will be eliminated. Obviously, the binder can be reused after filtering dirt.