How to reduce the consumption of the fiberglass chopped strand mat powder binder

Fiberglass chopped strand mat is mainly applied to the production of a variety of hand lay plate, boats, bathroom equipment, automotive parts and cooling towers of glass and steel products.

In the actual production process, adhesion, uniformity, is the most fundamental technology product key, relatively, to ensure the cohesiveness of the product while reducing the consumption of powder or emulsion that is fundamental to reduce the cost of inputs and improve the effectiveness.

How can we reduce the consumption of adhesive bonding on the basis of the guarantee it? In many years of actual production of glass fiber chopped strand mat powder which concluded the following:

1.       Powder content appropriateness.

2.       The ratio of water with the powder, in which the relevant tests can determine how much product will be able to direct bonding of the moisture content of the mat embryos.

3.       Flutter of the ratio of the size of the shock, the transmission belt fit it properly.

4.       Recycling rate, which refers powder recovered, recycled powder is fully utilized.

5.       Remove excess moisture in the process of drying and melting, the temperature setting is in the melting point of the powder.

Above five points is the underlying bond of the product. Of course, the basic elements are doing powder products. Emulsion products in the production are good so long as the ratio of the emulsion and water, it can be completely recycled.