2016年6月29日星期三

The Pultrusion Process: producing Fiber Reinforced Polymers

The Pultrusion Process: producing Fiber Reinforced Polymers

Pultrusion could be a continuous molding method using fiber reinforcement in polyester fiberglass chopped strand mat or alternative fiber bolstered polymers thermosetting compositions matrices.  Pre-selected reinforcement materials, like fibreglass roving, mat or artifact, are drawn through a rosin bathtub within which all material is totally fertilised with a liquid thermosetting compositions.  The wet-out fiber is created to the specified geometric form and force into a heated steel die. Once within the die, the rosin cure is initiated by dominant precise elevated temperatures. The laminate solidifies within the actual cavity form of the die, because it is unceasingly force by the pultrusion machine.

Raw Materials Used
1)      Resin
2)      Roving (Fiberglass roving provides the high longitudinal strength of pultruded merchandise.)
3)      Fiberglass Mat
Continuous strand mat provides the foremost economical technique of getting a high degree of cross physical properties. The mats square measure superimposed with roving; this method forms the fundamental composition found in most pultruded fiber bolstered polymers. The ratio of fiberglass mat to roving determines the connection of cross to longitudinal physical properties.
4) plain-woven and sewn material  
5)   Veil 
6) alternative Reinforcing Material

没有评论:

发表评论