The starting materials for
chopped strand mats are glass fiber manufacturers use cakes entirely,
although some often use roving, in part to save floor space.
Very important for the quality of the mat is the good sizing of the
fibers to give a good chopping characteristic and low static-electrical
load.
The plant is composed of the following sections :
-. Fiber Creel
-. Feeding and Cutting Service
-. Forming Section
-. Binder Applicators system
-. Drying Oven
-. Cooling and compaction
-. Trimming and Winding
Creel Frame
The spincake bobbins are placed in suitable number on the creel
frames. Frames these creels the fiber cake are un-winded, the cake creel
area should be in an air conditioning room with a reality humidity of
82-90 %
Feeding an Cutting Device
Through the feeding rolls the strand are drawn from the cakes.
To each of the cutters will be conveyed a partial of the total number of bobbins.
Forming Section
The mat is formed by cutting a great number of strands through
cutting devices which are disposed at equal distance on the top of the
forming chamber. Each device is furnished with a motor with variable
speed. the cutting devices are controlled independently, that allows an
uniform distribution of the fibers. Inside the forming chamber there
are strands dispersers with air support.
A section box below the wire mesh belt sucks the strand onto the belt.
The exhaust air is cleaned by filters.
Purchasing Fiberglass Chopped Strand Mat, please focus on Sichuan Sincere & Long-term
Complex Material Co., Ltd, and contact email: fred@chinaweibo.com.cn
or chat on Skype: fred.wei08
没有评论:
发表评论