Binder Applicators System For Fiberglass Chopped Strand Mat

Powder Binder

The glass fibers are transferred from the conveyor belt of the forming section to another conveyor belt for the binder application. The forming belt will remain clean and dry everytime. Binding with powder is composed by 2(two) powder-binder-applicators, and a series of sprays of demineralized (distilled) water.

Both sides of the mat, the upper and the lower-one, are lightly sprayed with distilled water, that operation is necessary or a better adhesion of the binder. The special powder-applicators warrant an optimal distributing .

Between the two applicators a vibrator is applied providing that the powder is also passing to the lower side of the mat.

Binding with Emulsion

The curtain system used warrants a perfect distribution of the binder. The excess of binder will be recovered by a special sucking system.

This system pulls the air through the fiberglass chopped strand mat and a part of the binder will be taken off. By that mater the binder will be distributed uniformly and the excess of binder eliminated. 

Obviously the binder will be re-employed after special filtering which separates the air and the dirt.

The binder is stored in containers in the mixing room and conveyed at low pressure by a pipeline to a small tank near the mat-plant.

A special device maintain the level of the tank constant. Also the recovered binder will be conveyed to the tank. A pumping system conveys the binder from that tank to the curtain distribution system.

 

Purchasing Fiberglass Chopped Strand Mat, please focus on Sichuan Sincere & Long-term Complex Material Co., Ltd, and contact email: fred@chinaweibo.com.cn or chat on Skype: fred.wei08