2016年7月13日星期三

Custom fiberglass without a mould (4)

Once you've got the form you would like, currently get an inexpensive shiny paint. does not matter what color, however black or red work well. Paint the surface. Now, rather like within the directions for the mirror-finish on top of, you would like to sand it down, longing for pits and valleys which can be highlighted by the shiny paint. If you've got some pits that are additional deep, you'll build them up with many layers of paint, or add some additional bondo. still sand, or alternate painting and sanding, till you've got an even uninteresting end. At this time you'll do as you wish with the box, paint it, vinyl it, or return up and mirror-finish it.

Now if you would like to create a whole structure, free-form from fibreglass, you're certain  some fun. You basically have 2 ways that of doing this. 1) build all-time low, so the highest, or 2) build the entire issue in one go.

If you'll build all-time low 1st, it is a bit easier. however the procedure is that the same. produce a example for your fibreglass out of two-part polyfoam. Sand and carve this foam to the precise form you would like your item to be. Take tutelage to not leave any massive pits or mis-shapen areas. The side of the froth example are going to be sent through the fibreglass directly. Any deformities are going to be amplified within the finished product. If you would like to, use bondo to reshape slightly.

Once you've got the example finished, begin applying fibreglass chopped strand mat over it. reckoning on however robust you would like the top structure to be, you may in all probability want quite an little bit of glass. Long skinny strips are easier to figure with over massive sinusoidal surfaces, wherever massive items are higher for flat areas. Use a laminating resin for all work.

Once you've got finished build up the fibreglass, you may ought to decide however you would like to end the merchandise. If you would like to try to to a piano end, simply begin adding the layers of finishing organic compound right over the ultimate layer of laminating resin. to color the thing, the procuedure are going to be constant, however you do not ought to dye the resin. you may in all probability ought to sand it out rather like the opposite comes on top of. once mistreatment paint as your final coat but, you'll use a brush-on paint to create smoothing go abundant quicker. you'll merely layer the paint on, and sand through it, that is far easier than sanding down resin to urge it good. Fiberglass chopped strand mat supplier in China, zccyfiberglass.

Once that is done, you would like to get rid of the example fromt he inside of the thing. Manually take away the maximum amount as you'll, scraping and cutting it away. you'll use fuel in little amounts to dissolve the froth, and wash it out.

没有评论:

发表评论